With the TEA-JAY Ice Tea Maker from Blomus you can quickly and easily prepare ice tea to your own taste.
Instructions for use (see images on supplied instructions):
1. Make sure the plastic cap is fully closed. Then twist the stainless steel top off the glass bottle.
2. Fill the bottle 1/3 full with cold water. Add syrup and/or fruit to taste.
3. Add ice cubes until the bottle is 2/3 full.
4. Close the bottle with the stainless steel top.
5. Check again that both the stainless steel top and the plastic cap are closed properly.
6. Now pull open the plastic cap. you see the plastic inner cup with the filter at the bottom.
7. Add the desired amount of tea (leaves) here.
8. Pour boiled water over the tea up to the line visible in the inner cup.
9. Be careful! The stainless steel is now hot, so hold the silicone part while you click the plastic cap back on the bottle (can only go in one way through the notches).
10. Let the tea steep (3-8 minutes).
11. Now turn the plastic cap 180° counterclockwise. This causes the tea to flow into the glass bottle and immediately cool down due to the cold ingredients. The tea leaves remain in the cap through the filter.
12. When the tea has flowed, close the bottle by turning the plastic cap back 180° (clockwise).
13. Hold the bottle by the silicone part and gently shake it back and forth to mix the ingredients.
14. To pour your homemade iced tea, open the plastic cap (180° degrees counterclockwise).
Ice Tea Maker
Item number: 64287
Color: Magnet (gray / anthracite)
Dimensions
Contents: 800 ml
Diameter: 9.5cm
Height: 30.5 cm
Material information
clear glass
Powder-coated stainless steel
Plastic
Silicone
Cleaning
The bottle is dishwasher safe, but we recommend washing it by hand.
This item is not suitable for the microwave.
Heb je deze al gezien?
